Top 10 Mercury Outboard Stator 125 Hp 1994

0

Finding your suitable readers for mercury outboard stator 125 hp 1994 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for mercury outboard stator 125 hp 1994 including detail information and customer reviews. Let’s find out which is your favorite one.

848 reviews analysed

1. Quicksilver 98432Q6 Zinc Trim Tab Anode Plate – Mercury and Mariner Outboards

Quicksilver 98432Q6 Zinc Trim Tab Anode Plate - Mercury and Mariner Outboards

Feature

Description

This extended trim tab anode fits into the anti-ventilation plate trim tab anode cavity in Mercury 9.9 hp through 15 hp (323 cc) 4-stroke BigFoot outboards, Force 25 hp outboards (serial number 0E090400 through 0E344999) and other 2-cycle Mercury and Mariner outboards. See your owner’s manual for specific application. Check for proper propeller clearance at time of installation. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

2. HIFROM New Ignition Stator Magneto Plate Pit Bike for 90cc 110cc 125cc Pit Bike XR50 CRF50 XR70 CRF70 Z50R SDG SSR 107 110 125 M IS01

HIFROM New Ignition Stator Magneto Plate Pit Bike for 90cc 110cc 125cc Pit Bike XR50 CRF50 XR70 CRF70 Z50R SDG SSR 107 110 125 M IS01

Feature

Description

HIFROM New Ignition Stator Magneto Plate:

Fit for XR/CRF 50 XR/CRF 70 Z50R(1988-1999) ZB50 and most pit bikes with 50cc, 70cc, 90cc, 110cc & 125cc motors(without electric starter)
The stator included a 12v Lighting coil with leads. Just plug in your 12V headlight or use it to charge a battery. This assembly is perfect for replacing your broken trigger assembly which happens often when the Chain comes off and breaks off the ignition trigger!! Get your bike running again!
You could also use this to convert a old Points motor over to electronic ignition although you still need to buy a CDI box.
To replace this part, you need to remove the flywheel. You need a 27mmx1mm backward thread flywheel puller(Honda CT70/XR100)available at most motorcycle shops; left ignition cover is listed in separate auction if you also need it

3. JETUNIT Genuine outboard 9 amp Stator Assy Maganet Coil For Mercury 30-85hp 3&4 cylinder 398-5454 A21 A22 A24 A25 A26 174-5454K1

JETUNIT Genuine outboard 9 amp Stator Assy Maganet Coil For Mercury 30-85hp 3&4 cylinder 398-5454 A21 A22 A24 A25 A26 174-5454K1

Feature

4. DB Electrical SAB0004 New Starter For Mercury Outboard Marine 35 40 50 Horsepower, 35Hp 40E 40Eh 40El 40Elh, 50-30829 50-32403 5366 50-37345 50-38890A1 50-38890 50-38890A1 50-55601A2 50-55801A 110241

DB Electrical SAB0004 New Starter For Mercury Outboard Marine 35 40 50 Horsepower, 35Hp 40E 40Eh 40El 40Elh, 50-30829 50-32403 5366 50-37345 50-38890A1 50-38890 50-38890A1 50-55601A2 50-55801A 110241

Feature

Description

Starter For Mercury 35Hp 35 Hp 1965-1969, 40E 33.3Ci – 40 Hp 1978-1983, 40Eh 33.3Ci – 40 Hp 1979-1983, 40El 33.3Ci – 40 Hp 1978-1983, 40Elh 33.3Ci – 40 Hp 1979-1983, 40Hp 33.3Ci – 40 Hp 1970-1977, 50Hp 43.9Ci – 50 Hp 1965-1975. 12 Volt, Counterclockwise Rotation, 9 Teeth, Pmdd Starter Type. Replaces Api Marine 50-38890, Mot3001; Arco Marine 5366; Mercury Marine 50-30829, 50-32403, 50-32411, 50-37345, 50-38890, 50-38890A1, 50-55601A2, 50-55801A; Sierra Marine 18-5601, 18-5641; United Tech 0996140-M030Sm, 996140, M055014A, M0551014A, M0551017, M0551017A, Sm09961, Smh12B31.

5. Vicue Outboard Lift Ring 91-90455-1 Lifting Eye 1 1/2"-16 for Mercury Mariner Force

Vicue Outboard Lift Ring 91-90455-1 Lifting Eye 1 1/2"-16 for Mercury Mariner Force

Feature

Description

Outboard Lift Ring Tool 91-90455-1 for most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2″-16 TPI threads.

Item specifics:
☛ Condition: Brand new and high quality, well packed;
☛ Lifting Ring (91-90455-1) for most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2″-16 TPI threads; Will NOT work on Verado;
☛ Heavy Duty,5/8 – 18, Precision Grade 8 fine threads on the lifting ring;with 1/2″ Diameter Threads;
☛ Black oxide finish preventing corrosion to assure many years of service.

Package Includes: A set of Outboard Lift Ring Tool 91-90455-1 as pictured.

Note: The picture can tell more than we can, what you see is what you will receive,please make sure it will fit your machine before purchase it.Please check pictures for more details.

6. DB Electrical SAB0168 New Starter For Mercury Mariner 40 50 60 Hp Outboard Marine 4 stroke 2001-2011,50-859377T, 50-884044T, 50-888161T, 50-893888T, 10153440, Mot3023, 5360, 18-6435 MOT3023 5360 5901

DB Electrical SAB0168 New Starter For Mercury Mariner 40 50 60 Hp Outboard Marine 4 stroke 2001-2011,50-859377T, 50-884044T, 50-888161T, 50-893888T, 10153440, Mot3023, 5360, 18-6435 MOT3023 5360 5901

Feature

Description

Starter For Mariner 50El B/F 4-Stroke 57.0Ci – 50 Hp 2001, 50Elhpt 4-Stroke 57.0Ci – 50 Hp 2001, 50Elpt 4-Stroke 57.0Ci – 50 Hp 2001, 50Elpt B/F 4-Stroke 57.0Ci – 50 Hp 2001, 50Elpt Efi 4-Stroke 57.0Ci – 50 Hp 2001, 60Elhpt 4-Stroke 57.0Ci – 60 Hp 2001, 60Elpt 4-Stroke 57.0Ci – 60 Hp 2001, 60Elpt B/F 4-Stroke 57.0Ci – 60 Hp 2001, 60Elpt Efi 4-Stroke 57.0Ci – 60 Hp 2001, Mercury 40Elpt B/F 4-Stroke 57.0Ci – 40 Hp 2001, 40Elpt Efi B/F 4-Stroke 60.8Ci – 40 Hp 2002-2011, 50Elhpt 4-Stroke 57.0Ci – 50 Hp 2001, 50Elhpt Efi 4-Stroke 57.0Ci – 50 Hp 2002-2005, 50Elhpt Efi 4-Stroke 60.8Ci – 50 Hp 2006-2011, 50Elpt 4-Stroke 57.0Ci – 50 Hp 2001, 50Elpt B/F 4-Stroke 57.0Ci – 50 Hp 2001, 50Elpt B/F Efi 4-Stroke 57.0Ci – 50 Hp 2002-2003, 50Elpt B/F Efi 4-Stroke 60.8Ci – 50 Hp 2004-2011, 50Elpt Efi 4-Stroke 57.0Ci – 50 Hp 2002-2003, 50Elpt Efi 4-Stroke 60.8Ci – 50 Hp 2004-2011, 60Elhpt 4-Stroke 57.0Ci – 60 Hp 2001, 60Elhpt Efi 4-Stroke 60.8Ci – 60 Hp 2001-2011, 60Elpt 4-Stroke 57.0Ci – 60 Hp 2001, 60Elpt B/F 4-Stroke 57.0Ci – 60 Hp 2001, 60Elpt B/F Efi 4-Stroke 60.8Ci – 60 Hp 2002-2011, 60Elpt Efi 4-Stroke 60.8Ci – 60 Hp 2002-2011, 60Exlpt B/F Efi 4-Stroke 60.8Ci – 60 Hp 2009-2011. 12 Volt, Counterclockwise Rotation, 9 Teeth, Pmdd Starter Type. Replaces Api Marine Mot3023; Arco Marine 5360; Johnson Electric 10153440; Mercury Marine 50-859377T, 50-884044T, 50-888161T, 50-893888T; Sierra Marine 18-6435

7. MBS Mfg 1 1/2"-16 Lift Eye Ring for Mercury Mariner, Force, Yamaha 91-90455-1

MBS Mfg 1 1/2"-16 Lift Eye Ring for Mercury Mariner, Force, Yamaha 91-90455-1

Feature

Description

the following list is for reference only. Please check the thread size of your motor before ordering. Engine lifting ring for mercury, mariner, force and some yamahas outboard motors with 1 1/2″-16 threads. ***this model has heavy duty, 5/8 – 18 precision grade 8 fine threads on the lifting ring. *** ***a higher quality tool thanpetition*** don’t settle for the junk sold by others, with 1/2″ diameter threads that are not tool quality. This pulleres with a black oxide finish preventing corrosion to assure many years of service. We offer usps or ups shipping. Choose which ever you prefer! us tracking will be provided with both options! note: will not work on verado. Proudly manufactured and assembled in the united states.

8. Vicue Flywheel Puller 91-849154T1 for 45HP+ Mercury Mariner Lift Ring 91-90455-1 Lifting Eye

Vicue Flywheel Puller 91-849154T1 for 45HP+ Mercury Mariner Lift Ring 91-90455-1 Lifting Eye

Feature

Description

Flywheel Puller For Mercury Mariner 91-849154T1 Lift Ring 91-90455-1 Lifting Eye

Replace Part #: 91-849154T1 91-90455-1

SPECIFICATIONS:
☛ Flywheel Puller with crank shaft protector (91-849154T1)
☛ Lifting Ring (91-90455-1)
☛ Fit for most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2″-16 TPI threads
☛ Doesn’t work on Verado
☛ Puller comes with a black oxide finish preventing corrosion to assure many years of service
☛ Tool has heavy duty, 1 1/2″ – 16 TPI tool,5/8″ – 18 TPI Bolt and Lift Ring Threads

Note: The picture can tell more than we can, what you see is what you will receive,please make sure it will fit your machine before purchase it.Please check pictures for more details.

9. Sierra International 18-5199 Marine Condenser for Johnson/Evinrude Outboard Motor

Sierra International 18-5199 Marine Condenser for Johnson/Evinrude Outboard Motor

Feature

Description

OEM: OMC 580321

10. sthus Flywheel Puller 91-849154T1 Lift Ring 91-90455-1 Lifting Eye

sthus Flywheel Puller 91-849154T1 Lift Ring 91-90455-1 Lifting Eye

Feature

Description

Description:
Features: 1.Flywheel Puller with crank shaft protector & Lifting Ring Fits for most 50HP and up Mercury, Mariner, Force and some with 1 1/2″-16 thread Yamahas outboard engines. 2.This Puller Kit comes with a black oxide finish to prevent corrosion and ensure many years of service. 3.This model has heavy duty, 5/8 – 18, Precision Grade 8 fine threads on the pusher bolt and the lifting ring. Not work on 2005 Verado.
1 x Flywheel Puller Kit
Flywheel puller with crank shaft protector 91-849154T1,Lifting Ring 91-90455-1 A must have tool when changing Mercury outboard motors on boats and lifting the engine off transom Nice craftsmanship and solid 5/8″-18 TPI Bolt and Lift Ring Threads For Most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2″-16 TPI threads units from the 1960s to present,but pls check thread diameter to verity

Conclusion

By our suggestions above, we hope that you can found Mercury Outboard Stator 125 Hp 1994 for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general