Top 9 Long Range Remote Control Relay

0

Finding your suitable readers for long range remote control relay is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for long range remote control relay including detail information and customer reviews. Let’s find out which is your favorite one.

776 reviews analysed

1. Wireless Relay 12V Long Range Remote Control Switch, Universal 433Mhz RF Transmitter Receiver Mini Remote Relay in Latched Module for Home Use and More DC 3.7V 4.5V 5V 6V 7.4V 9V 12V

Wireless Relay 12V Long Range Remote Control Switch, Universal 433Mhz RF Transmitter Receiver Mini Remote Relay in Latched Module for Home Use and More DC 3.7V 4.5V 5V 6V 7.4V 9V 12V

Feature

Description

This is a simple, safe, convenient, widely used, compact and flexible remote control switch.

*Working Voltage: DC3.5V-DC12V
*This remote control will work more then 300M
*Wide Range Working Voltage DC3.7V 4.5V 5V 6V 9V 12V
*it can work with DC Power / Rechargeable lithium battery / Rechargeable
*Max Load: 1A (have better Load less than 700ma)
*Quiescent Current: 5ma
*Relay Working Current: 20-30ma

.Working Mode: Momentary. Toggle .Latched adjustable
(Notice: we send latched mode default . If you want to change the working mode, please use solder tool to operate)
How to change working mode :
★Momentary : Connect the right side 2 points (M) with a soldering iron
★Toggle : Let Point L and Point M in non-occupation

Encoding Type: Learning point to add extra transmitter
Learning method:Input 3.5V – 12V for the Receiver ,Connect the learning point with tweezers, the receiver LED indicator lights up or flashes, Press remote button A 1 time, Led indicator flash for 3 times , Then Press remote button B 1 time , Led indicator flash for 3 times again , it mean learning successfully

.Normally Open Port (NO) Common Port (COM) Normally Close Port (NC) Input DC3.5V-DC12V Output 0V Switching Value
1.Momentary—press one button is working /ON. loosen your finger on the same button is stop/OFF .(one channel switch need one button remote)
2.Toggle—press one button for one time is working/ON .press the same button again is stop/OFF .(one channel switch need one button remote)
3.Latched—press one button is working/ON ,press another button is stop/OFF . ( one channel switch need 2 buttons remote )

Package Include:
1 x Receiver(without cover)
1 x Transmitter(with battery)

2. Electop Wireless Remote Switch, 90V-264V Wireless RF Switch for Household Appliances,Pump,Lights Ceiling and Electrical Equipment, 30A Relay with 2 Remote Controls (984ft & 328ft Long Range)

Electop Wireless Remote Switch, 90V-264V Wireless RF Switch for Household Appliances,Pump,Lights Ceiling and Electrical Equipment, 30A Relay with 2 Remote Controls (984ft & 328ft Long Range)

Feature

Description

Electop Wireless Control Switch

1.About Wireless Control Switch
The product is a wireless remote switch with 30A relay.
This switch has a wide range of use, easy to install and easy to use.
It lets you turn on or shut off power of household appliances (90V – 264V) such as monitor, printer, speakers and more.
It even can be used for industrial equipment or Security equipment (Just wiring and use).

2. Technical indicators
Input voltage: AC 90V-AC 264V
Output current: 30A
RF Working frequency: 433MHz
Range: up to 300 m(controller A)/100 m(controller B) in open field
Receiver Sensitivity: -95dbm
Max number of controllers: 16

3. How to clear the Memory
Press the button eight times to clear memory then add a new controller again (if you have problem when you add a new controller).

4. Package Includes:
2 x remote controls (battery included)
1 x Switch
1 x Manual

3. Supreform Universal Waterproof 2 Channel Relay 12V 24VDC/AC 2000FT(600m) Long Range Remote Control Switch for Lights, Water Pump, Heater, Garage Door Gate Opener, Pre-Wired 3.3 Feet External Receiver

Supreform Universal Waterproof 2 Channel Relay 12V 24VDC/AC 2000FT(600m) Long Range Remote Control Switch for Lights, Water Pump, Heater, Garage Door Gate Opener, Pre-Wired 3.3 Feet External Receiver

Feature

Description

1.Product Description:
The supreform universal 2 Channel Long Range remote control kit is an ideal accessory for your garage door & gate opener, lights, water pump and heaters.
The working mode of the switch has been set to momentary mode in factory. It can be easily changed to toggle or lock mode according to you needs.
The powerful remote control included in the kit can operate your garage door & gate opener, lights, water pump and heaters up to 2000FT far away through the receiver.(It’s theoretical range, it will be decreased under real work environment.)
The waterproof design of the receiver makes it can be installed outdoor directly without extra waterproof cover.
It’s easy to be wired to the opener with the pre-wired 3.3 feet cord.
The 2-channel design makes it can control up to 2 separate garage door & gate openers, lights, water pumps and heaters.

2.Technical specifications:
Operating voltage: 9-24VDC/AC
Operating current: <>
Frequency: 315MHz
Channel: Dual Channel
Operating range: Maximum 2000 ft. (600M)
Output: Relay SPDT
Working Mode: Toggle (Inching)
Battery of the remote control: 9V 6F22

3.Contents:
1 x Receiver;
1 x Remote ;
1 x User Manual;
1 Set of Installation Accessories.

4. 2000 Meters Long Distance Wireless Remote Control Switch high Power Water Pump Motor Lighting Industrial Wireless Remote Control Switch AC 110V 220V Relay Switch Transmitter High Range 6600ft

2000 Meters Long Distance Wireless Remote Control Switch high Power Water Pump Motor Lighting Industrial Wireless Remote Control Switch AC 110V 220V Relay Switch Transmitter High Range 6600ft

Feature

Description

Package Include
1* Receiver (with antenna)
1* Remote Control (with battery, If you need extra remote control , please tell us. )

Product Description
Working Voltage : 85V-250V
Output Current : 30A
Rated power: 3000W
Working Frequency : 315 MHz( Frequency can be customized)
Receiver sensitivity: : -114dBm (RXB8 Modul)
Working temperature : -10’C – +60’C
Code type :Learning code
Receiver size: 123*61*30.5mm
Cable length of antenna: 3m
Range: 1000-3000M (We actually tested 2360 meters.)

Control mode Description
Toggle (1 button on / same button off)
Latch (1 key on / other key off)
Momentary (Press and hold -> On; Release -> Off)

Set the control mode
Toggle: Turn 1of the dip switch not to ON, 2 to ON.
Momentary: Turn 2 of the dip switch not to ON, 1 to ON.
Latch: Turn 1 and 2 of the dip switch not to ON.

Learning method: Turn on the power, Receiver light will light for 3 seconds, After it is extinguished, press the learning button briefly. The indicator light is on. Press the remote control button immediately. The indicator light will turn off. Learning success

Clear code:Turn on the power, Receiver light will light for 3 seconds, After light extinguishing, press and hold the learning button of the receiver. The indicator light is on. After eight seconds, the indicator light flashes three times and goes out. The clear code is successful.

Tip:
1: The theoretical control power is 6600W, because the load starts current, so it is not recommended to exceed 3000W
2: The hand transmitters have a range In the open area of about 2500m. Constructions, interfering radiation and interference fields reduce the range.

5. InduSKY DC 12V 433Mhz 4CH Channel Wireless Relay Receiver Remote Control Switch with Long Range Remote Control Transmitter and DC Female to Screw Connector

InduSKY DC 12V 433Mhz 4CH Channel Wireless Relay Receiver Remote Control Switch with Long Range Remote Control Transmitter and DC Female to Screw Connector

Feature

Description

Specifications
Working Voltage: DC12V
Working Frequency: 433MHz
Contact Capacity: ≤7A / 250VAC; 10A / 30VDC
Control Sensitivity: ﹥105DBm
Number of Control: 4 normally open / normally closed
Coding Type: learning type, pairing with remote control via pairing button
Working Mode: inter-lock, self-lock, jog (default is jog mode, if you want to switch to other modes, you can adjust it yourself)
Remote Control Distance: 1000 meters, this distance is a theoretical distance without interference, the effective distance is about 50-200 meters.

Please Note: Due to shipping reasons, the remote control does not include the batteries, you need to buy them yourself. The suitable battery is 12V 23A alkaline battery. One for each remote control.

Product List
2 x Remote Control (Without battery)
1 x Relay Receiver with Shell
1 x 5.5/2.1mm DC female to Screw Adapter
1 x English Manual

6. Long Distance RF Switch Transmitters & Receivers DC 12V 2 Channel Wireless Relay Remote Control Switch

Long Distance RF Switch Transmitters & Receivers DC 12V 2 Channel Wireless Relay Remote Control Switch

Feature

Description

Features:
100% High quality and Brand new.
Wireless control, easy to install.
The wireless RF signal can pass through walls, floors and doors.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance.
It applies to light lamp, auto door, window, lifting equipment, motor controller, water pump, hoist, industrial controller and any others security etc field.

Specifications:
Transmitter
Battery Type: 1pc L1028 battery(not included)
Remote Distance: 1000m(Theoretical value)
Receiver
Input Voltage: DC 12V
Operating Frequency: 433MHZ
Channel Numbers:2CH
Operation Way: Inching, Self-locking
Coding Way: Intelligent Learning
Operating Temperature: -40 Degree ~ +80 Degree
Output Current: 10A

Receiver Sensitivity: -105dBm

Factory Default: Self-locking
Code:Learning Code (jog/Non-Latched .inter-lock/Latched .self-lock /Self Latched)
Board Dimension: 35×24.6x10mm

Package Included:
1 x Receiver
1 x Transmitter(battery is not included)

7. Wireless Switch 330ft Long Range Wide Voltage 85~265V Large Load Remote Control for Lights Pumps Water Heaters

Wireless Switch 330ft Long Range Wide Voltage 85~265V Large Load Remote Control for Lights Pumps Water Heaters

Feature

Description

Size:120 VAC |  Color:Remote Switch

Remotely control the on/off for pool lights, pumps(<800w), landscape="" lighting,="" water="" heater,="" fans,="" appliance="" and="" more.="" using="" the="" remote="" switch,="" you="" don't="" have="" to="" flip="" thewall="" switch="" or="" breaker="" back="" and="" forth.="" if="" you="" want="" to="" control="" larger="" current="" larger="" load,="" the="" receiver="" needs="" to="" be="" connected="" to="" an="" ac="">

Specification:

  • Wireless range: over 330ft (100m), RF signal can go through walls.
  • Input voltage range: AC 85V~265V 50/60Hz (can be used in 110V voltage)
  • Rated Current: 12Amp, max 16Amp
  • Standby power consumption: 0.3W
  • Control Switch Type: 30Amp Relay
  • Load capacity: Resistive load: 3000W (such as incandescent/halogen lamp, water heater ); Inductive load: 800W (such as pumps, LED lamp)
  • Material: PC Plastic
  • Weight: 4.6 Oz
  • Receiver size: 3.5×2×1.2 inches
  • Transmitter size: 4×1.5×0.5 inches

Includes:

  • 1 × Receiver
  • 1 × Handheld Transmitter
  • 1 × Alkaline Battery(Type: 23A 12V)

8. DONJON Wireless Remote Switch with 328ft Long Range DC 12V/24v/48v/72V Switch for Anti-Theft Alarms, Security Systems Roller Lind Door,Gate Barriers, Motor Cycles etc (Two Remote Controls)

DONJON Wireless Remote Switch with 328ft Long Range DC 12V/24v/48v/72V Switch for Anti-Theft Alarms, Security Systems Roller Lind Door,Gate Barriers, Motor Cycles etc (Two Remote Controls)

Feature

9. INSMA 433Mhz Wireless RF Switch Long Range DC 12V 4CH Channel Wireless Remote Control Switch, DC12V Relay Receiver Module, Transmitter Toggle Switch RF Relay (2 Transmitter & 1 Receiver)

INSMA 433Mhz Wireless RF Switch Long Range DC 12V 4CH Channel Wireless Remote Control Switch, DC12V Relay Receiver Module, Transmitter Toggle Switch RF Relay (2 Transmitter & 1 Receiver)

Feature

Conclusion

By our suggestions above, we hope that you can found Long Range Remote Control Relay for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general