Top 9 12V Dc Cooling Fan 10

0

Finding your suitable readers for 12v dc cooling fan 10 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 12v dc cooling fan 10 including detail information and customer reviews. Let’s find out which is your favorite one.

998 reviews analysed

1. ANVISION 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12

ANVISION 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12

Feature

Description

Color:Black ( 12V 40mm 2-PIN FAN )

Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g

Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)

Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test

*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.

2. ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24

ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24

Feature

Description

Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g

Rated Voltage: 24V DC
Operating Voltage Range: 21.6-26.4V DC
Start-up Voltage: 14.0V DC
Rated Current: 0.06A

Rated Speed: 6000PRM
Air Flow: 5.07CFM
Air Pressure: 2.45mmAq
*Noise Level: 23.20dB(A)
Life Expectancy: 50000H at 25degree test

*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.

3. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

Feature

Description

Color:12V

This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.

 

Specification:

Rated Voltage: DC 12V

Consuming Current: 0.08A

Connector: 2pin-ph2.5

Speed: 6000 + -10% RPM

Air Flow: 6.5 CFM

Static Pressure: 2.9

Noise Level: 27dBA

Note: Any questions, you can contact us and we will give you a satisfied solution!

Notice!!!

Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.

4. GDSTIME Dual Ball Bearings 120mm x 120mm x 25mm 5 inch 12v Brushless DC Cooling Exhaust Fan

GDSTIME Dual Ball Bearings 120mm x 120mm x 25mm 5 inch 12v Brushless DC Cooling Exhaust Fan

Feature

5. DC Brushless Cooling Fan, UCEC 4010 12V DC Axial Fan 40x40x10MM 2Pin for Computer Case, 3D Printer Extruder Humidifier and Other Small Appliances – 2 Pack

DC Brushless Cooling Fan, UCEC 4010 12V DC Axial Fan 40x40x10MM 2Pin for Computer Case, 3D Printer Extruder Humidifier and Other Small Appliances - 2 Pack

Feature

Description

Color:12V

UCEC DC Brushless Cooling Fan is design for computer Case, 3D Printer Humidifier and other small appliances.

Features:
Electrical Protection: Electronic circuit protection, impedance protection and temperature control protection.

Specification:
Frame Material: Plastic PBT UL94-V0
Blades Material: Plastic PBT UL94-V0
Rated Voltage: 12V DC
Bearing System: Ball and Sleeve Bearing
Storage Temperature:-30℃ — 70 ℃
Size: 40x40x10MM / 1.6×1.6×0.39inch
Blades Diameter: 38 mm
Connector: 2pin-ph2.5
Operation Voltage Range: 6.0-13.8V DC
Current: 0.09 Amp
Input Power 1.08 W
Speed:7000 R.P.M
Air Flow: 6.08 CFM
Noise Level: 28 dBA
DC Line Length: 360mm
Weight: 15g
Color: Black

Installation:
Step 1: Install the screws and nuts on the fan
Step 2: put the fan on the computer case and then use screw driver to screw it up carefully
Step 3: Connect the cable to the fan connector

Package Includes:
2 x UCEC 12V DC Brushless Cooling Fan

6. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

Feature

7. PLUSPOE 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing for Computer case 3D Printer Humidifier and Other Small Appliances Series Repair Replacement

PLUSPOE 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing for Computer case 3D Printer Humidifier and Other Small Appliances Series Repair Replacement

Feature

Description

Color:12V-2Pack

Package Included: 2 x 12V DC brushless fans.

Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 9 Blades (Provide Bigger Airflow than 7 Blades), Black PBT (UL94V-0)
Bearing System: Two Ball Bearings

Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2VDC
Start-up Voltage: 6V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)

Rated Speed: 6800RPM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.5 dB(A)
Conform to RoHS: Yes
Safety Approvals: CE ROHS
Life Expectancy: 50000H at 25degree test
Net Weight: 18.7g

*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.

8. ANVISION 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12

ANVISION 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12

Feature

Description

Color:Black ( 12V 40mm 2-PIN FAN )

Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g

Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)

Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test

*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.

9. LICTOP 3D Printer Cooling Fan 40 x 40 x 10mm 4010 Brushless Dc Cooling Fan 12v for Extruder Makerbot Parts 5 Pcs

LICTOP 3D Printer Cooling Fan 40 x 40 x 10mm 4010 Brushless Dc Cooling Fan 12v for Extruder Makerbot Parts 5 Pcs

Feature

Description

Brushless cooling fan specifications:
material: plastic
Colour: Black
Rated voltage: DC12V
Working voltage: DC10.8-13.2
Current consumption: 0.10A (maximum 0.12)
Power consumption: 1.2W (maximum 1.44)
Connector: 2pin-ph2.5
Rated speed: 6200 PRM
Direction of rotation: clockwise
Size: 40x40x10mm/1.6″x1.6″x0.4″
Scope of application: widely used in DIY 3D printer extruder Makerbot, anet a8 parts, please pay attention to the length of the wire is suitable for your home 3D printer Makerbot, anet a8 wiring length.

Package list
5 x square brushless cooling fan

Conclusion

By our suggestions above, we hope that you can found 12V Dc Cooling Fan 10 for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general